Herriman is the youngest big city in the south valley. It had about 1,500 people in 2000, 22,000 in 2010, and 55,000 in 2020, climbing the Oquirrh foothills at about 5,000 feet. Large-scale building started in 1998 with Rose Creek Estates, then Rosecrest spread across more than 2,500 acres, and a 2007 annexation added 4,000 acres from Bluffdale. Nearly every home is a stucco-and-stone two-story from the 2000s or later with a full basement, many of them walkouts on the slope.
The hills above town have burned twice. On September 19, 2010 the Machine Gun Fire from Camp Williams burned about 4,300 acres, destroyed three homes, and evacuated 1,600. On June 29, 2012 the Rosecrest Fire took six houses. Burn scars shed water, and on September 14 and 15, 2013 heavy rain sent mud and flooding through Herriman, South Jordan, and West Jordan. June 6, 2015 brought another round of flooded homes. The valley-wide shaking of the March 18, 2020 earthquake did not spare the newer foundations either.
Herriman homeowners who call this site are put on the phone with an independent local mold provider. The provider handles the inspection and the work. This site sets up the call.
A walkout basement that took mud and water through the uphill window wells in a storm is a basement mold remediation job, and the pad under the carpet comes out first. A new home with a bathroom fan that ends in the attic and a ceiling that stains every winter is bathroom mold removal work. A furnace in the basement pulling return air from a wet lower level is why HVAC mold cleaning often follows.
Drywall, plumbing, and electrical work after removal goes through the Herriman City Building Department. The city's water office handles culinary and secondary water for the whole foothill, and it is the call when a pressure change or a running meter points at a line that split in the cold.
Call (385) 534-4662 to be connected with a local mold provider serving Herriman.
Containment, negative air, and removal of the wet drywall, carpet pad, and insulation that grew it, then cleaning and drying what stays.
Dark growth handled under full containment with protective gear. Color does not name the species, and the work does not change because of it.
Finished basements that took water from a window well, a seep, a sump, or a burst line, opened, cleared, and dried to the foundation.
Room-by-room containment and removal after a long leak, a winter pipe burst in an empty house, or a basement that flooded more than once.
Growth on ceilings, behind vanities, and inside walls from steam, a slow supply leak, or a fan that vents into the attic.
Furnace cabinet, coil, humidifier, and duct cleaning when the smell comes with the blower, plus swamp-cooler pads and pans on older homes.
Finding and removing the wet material behind a musty smell in a basement or crawl space, then clearing the air instead of covering it.
Drywall, baseboard, insulation, and subfloor put back after removal, with the wall read dry before anything closes.